Robotika
Po shfaqen 176–200 nga 350 përfundime gjithsej
-
Accessore Robotika, Do It Yourself, Robotika
L293D Motor Driver Shield
L293D DC Motor Drive Shield: This expansion board is designed for Arduino and Raspberry Pi, enabling precise control of DC and stepper motors.
With support for up to 600mA per channel and integrated protection features, it’s ideal for robotics and automation projects.
SKU: n/a -
Accessore Robotika, Do It Yourself, Robotika
L298N Dual H-Bridge Motor Driver Module
L298N Dual H-Bridge Motor Driver Module
The L298N Driver Board Module is designed for high-power motor control in Arduino projects, smart cars, and robots. It supports drive voltages from 5V to 35V and delivers up to 2A per bridge. With its robust L298N chip, it offers strong driving capability, low heat, and high reliability. Ideal for handling demanding motor applications.
SKU: n/a -
Accessore Robotika, Do It Yourself, Robotika, Sensor
L3G4200D Triple Axis Angular Velocity Sensor
Accurately measure angular velocity with the L3G4200D Triple Axis Sensor.
Ideal for motion sensing in robotics, gaming, and industrial applications, this sensor offers reliable 3-axis gyroscope data
SKU: n/a -
Accessore Robotika, Do It Yourself, Module, Robotika
LAN8720 Module Network Ethernet Board
Expand your project’s connectivity with the LAN8720 Module Network Ethernet Board.
This compact and efficient board enables reliable Ethernet connectivity for various applications.
Providing a straightforward solution for integrating network communication into your devices with ease
SKU: n/a -
Accessore Robotika, Do It Yourself, Microcontroller, Module, Robotika, Sensor
LCD Display 16×2 I2C për Arduino
Accessore Robotika, Do It Yourself, Microcontroller, Module, Robotika, SensorLCD Display 16×2 I2C për Arduino
LCD Display 16×2 I2C është ekran karakteresh me lidhje të thjeshtë për Arduino.
Falë modulit I2C, përdor vetëm 2 linja komunikimi (SDA/SCL), duke reduktuar kabllot dhe duke e bërë instalimin shumë më të lehtë.
Ideal për projekte DIY, automatizim dhe aplikime me sensorë, me ndriçim LED dhe kontrast të rregullueshëm për lexim të qartë.
SKU: n/a -
Accessore Robotika, Do It Yourself, Module, Robotika
LCD Display 20×4 I2C për Arduino – Ekran Karakteresh me Modul I2C
Accessore Robotika, Do It Yourself, Module, RobotikaLCD Display 20×4 I2C për Arduino – Ekran Karakteresh me Modul I2C
LCD Display 20×4 I2C është ekran karakteresh me 4 rreshta dhe modul I2C për lidhje të thjeshtë me Arduino, ESP32 dhe projekte DIY. Ideal për shfaqjen e sensorëve, menuve dhe sistemeve të automatizimit.
SKU: n/a -
Accessore Robotika, Do It Yourself, Module, Robotika, Sensor
LDR Module Light Control Switch Photoresistor brightness
Accessore Robotika, Do It Yourself, Module, Robotika, SensorLDR Module Light Control Switch Photoresistor brightness
The LDR Module Light Control Switch Photoresistor offers an easy and effective way to incorporate light-sensing capabilities into your Arduino projects. With its adjustable sensitivity and simple output, it provides flexibility and control for a wide range of light-dependent applications.
SKU: n/a -
Accessore Robotika, Do It Yourself, Robotika
LDR Photoresistor Sensor
Detect light levels with the LDR Photoresistor Sensor.
Perfect for Arduino and other electronics projects, this light-dependent resistor provides real-time light intensity measurements, making it ideal for light detection, automation systems, and ambient light adjustments
SKU: n/a -
-
-
Accessore Robotika, Batteries, Do It Yourself, Robotika
Lithium Battery 18650
- High Capacity: With a typical capacity ranging from 2000mAh to 3500mAh, the 18650 battery offers long-lasting power for your devices.
- High Discharge Rate: Delivers consistent performance with high discharge rates, making it suitable for high-drain applications such as flashlights, power tools, and vaping devices.
- Rechargeable: This battery is designed for multiple charge cycles, ensuring a cost-effective and environmentally friendly power solution.
- Compact Size: The 18650 battery’s cylindrical design makes it easy to fit into various devices without compromising on power.
SKU: n/a -
Accessore Robotika, Do It Yourself, Module, Robotika
LM2596S DC-DC 3.6-46V buck converter step down module
Accessore Robotika, Do It Yourself, Module, RobotikaLM2596S DC-DC 3.6-46V buck converter step down module
The LM2596S DC-DC Buck Converter Step-Down Module offers a practical and efficient solution for voltage regulation in a range of electronic applications.
Its wide input range, adjustable output, and high efficiency make it an excellent choice for both professional and DIY projects requiring reliable power conversion
SKU: n/a -
Accessore Robotika, Do It Yourself, Robotika, Sensor
LM75A Temperature Sensor
Monitor temperatures accurately with the LM75A Temperature Sensor.
This reliable digital sensor provides precise temperature readings with an I2C interface, making it ideal for a wide range of applications including environmental monitoring, HVAC systems, and embedded projects
SKU: n/a -
Accessore Robotika, Do It Yourself, Microcontroller, Module, Robotika, Sensor
Lora Module SX1278 Long Range 433mhz DRF1278F
Accessore Robotika, Do It Yourself, Microcontroller, Module, Robotika, SensorLora Module SX1278 Long Range 433mhz DRF1278F
- Model: SX1278 / DRF1278F
- Frekuenca: 433MHz
- Teknologji: LoRa (Long Range)
- Rreze komunikimi: deri në disa km (në kushte ideale)
- Kompatibilitet: Arduino, ESP32, Raspberry Pi
SKU: n/a -
Do It Yourself, Module, Robotika, Sensor
Magnetic Field Compass Magnetometer GY-271
Navigate with precision using the GY-271 Magnetic Field Compass Magnetometer.
This compact sensor measures magnetic fields with high accuracy, providing reliable heading information for navigation and orientation applications in robotics, drones, and other electronic projects
SKU: n/a -
Accessore Robotika, Do It Yourself, Module, Robotika, Sensor, Uncategorized
Magnetometer Altimeter Barometer MPU6050 HMC5883L GY-87
Accessore Robotika, Do It Yourself, Module, Robotika, Sensor, UncategorizedMagnetometer Altimeter Barometer MPU6050 HMC5883L GY-87
1️⃣ Lidhni VCC me 3.3V ose 5V të Arduino.
2️⃣ Lidhni GND me GND.
3️⃣ Përdorni SDA dhe SCL për komunikim I²C.
4️⃣ Përdorni bibliotekat Wire.h dhe Adafruit për leximin e të dhënave.SKU: n/a
